Merge master into worktree-windows-runtime

2026-07-20 22:30:29 +08:00
parent 7239513b98 171a0e2b30
commit 62b40e8634
116 changed files with 3614 additions and 377 deletions
@@ -2,5 +2,5 @@
 # side as of the last confirmed-consistent state. Both languages carry equal authority;
 # after editing either side, bring the other along and re-record with:
 #   pnpm run verify-translation-pairing --write
-2026-07-20-error-cause-chain-diagnostics.md: 2d860d0e966158dd9ec12b45f88e3b031e1cb35a
-2026-07-20-error-cause-chain-diagnostics.zh.md: 6eac19dd08d50e4662d53889577b5e3ddabaafdd
+2026-07-20-error-cause-chain-diagnostics.md: 391e35997bb1bb050dd2ca620920961d77bb1c46
+2026-07-20-error-cause-chain-diagnostics.zh.md: 90d6559a9410e8a4e5475db9560a2a177ba7a1a7
@@ -14,7 +14,7 @@ A TUI run against an unreachable DeepSeek endpoint failed with the single notice
 ## Decision

 - `dsh-llm` exports `errorChain(value)`: renders a thrown value with its full `cause` chain (`outer: inner: …`) and AggregateError members (`msg [m1; m2]`), with circular-cause and hostile-coercion containment. It is a diagnostic-surface renderer only; routing stays on `HarnessError.code`.
- The DeepSeek adapter wraps a pre-response transport failure in `LlmError('NETWORK')` naming the configured `baseURL` and chaining the original `TypeError` as `cause`. An aborted request keeps its `DOMException` so the loop still classifies it as cancellation, not a provider failure.
+- The DeepSeek adapter wraps a pre-response transport failure in `LlmError('TRANSPORT')` naming the configured `baseURL` and chaining the original rejection as `cause`. An aborted request becomes `LlmError('ABORTED')`; because the turn signal is already aborted, the loop still classifies the turn as cancellation rather than recovery.
 - Every diagnostic seam renders through `errorChain` instead of `error.message`/`String(error)`: the agent-loop's durable `turn/end` error message (`errorData`), its logger warnings, the TUI's `agent/error` notice and startup-failure line, and `dsh-stdio`'s startup-failure log lines. The per-package `renderThrown` copies in `dsh-agent-loop`, `dsh-stdio`, and `dsh-tui` are deleted in favor of the one shared renderer.
 - `dsh-stdio` renders failure `turn/end` reasons: `[turn failed <code>] <message>`, `[turn aborted] <reason>`, `[turn rejected] <reason>`, `[turn interrupted by a previous process exit]`, and the output-token-limit notice. Unknown merge-extended kinds fall through as ordinary turn ends.

@@ -14,7 +14,7 @@ TUI 连接不可达的 DeepSeek 端点时，失败只显示一条 `fetch failed`
 ## Decision

 - `dsh-llm` 导出 `errorChain(value)`：渲染抛出值及其完整 `cause` 链（`outer: inner: …`）与 AggregateError 成员（`msg [m1; m2]`），并容错循环 cause 和恶意强制转换。它只是诊断表面的渲染器；路由仍然基于 `HarnessError.code`。
- DeepSeek 适配器把拿到响应之前的传输失败包装成 `LlmError('NETWORK')`，写明配置的 `baseURL` 并把原始 `TypeError` 链为 `cause`。被中止的请求保留其 `DOMException`，使循环仍将其归类为取消而非 provider 失败。
+- DeepSeek 适配器把拿到响应之前的传输失败包装成 `LlmError('TRANSPORT')`，写明配置的 `baseURL` 并把原始拒绝值链为 `cause`。被中止的请求变为 `LlmError('ABORTED')`；由于轮次信号已处于中止状态，循环仍将该轮次归类为取消而非恢复。
 - 每个诊断接缝改用 `errorChain` 而非 `error.message`/`String(error)`：agent-loop 的持久化 `turn/end` 错误消息（`errorData`）、其日志警告、TUI 的 `agent/error` 通知与启动失败行、以及 `dsh-stdio` 的启动失败日志行。`dsh-agent-loop`、`dsh-stdio`、`dsh-tui` 里各自的 `renderThrown` 副本被删除，统一使用这一个共享渲染器。
 - `dsh-stdio` 渲染失败的 `turn/end` reason：`[turn failed <code>] <message>`、`[turn aborted] <reason>`、`[turn rejected] <reason>`、`[turn interrupted by a previous process exit]` 以及输出 token 上限通知。未知的 merge 扩展 kind 按普通 turn 结束处理。